Spectra 1964 Model C610 Complimiter

Description

The Model C610 is the based on the original 1969 version of the Model 610 Complimiter. From the custom anodized aluminum knobs and black trimmed vu meter, to the internal discrete circuits, the Model C610 represents what made Spectra an industry standard.
The C610 utilizes the same operation format as the original with the addition of a third switchable meter setting, as well as 80/240 50/60hz VAC operation. The hand-built modules are made and tested in the same manner as the original 1969 version. The quality of materials used in the processes of building the Model C610 remain the same as before. This build quality of all Spectra 1964 products is an important hallmark, which results in the long-term value of this unique technology.
50 years after its release, the Model C610 has specifications that go unrivaled in today’s industry, proving Spectra founder William G. Dilley was decades ahead of his time. And now, a new generation of engineers is discovering the Spectra sound for themselves.
From the original Model 610 brochure, ca. 1969:
“Spectra introduces the Model 610 “COMPLIMITER,” the newest proven concept in a rack-mounting compressor/limiter system with performance both measurably and audibly discernable as “beyond state of the art.” This unit performs the functions of peak-limiting and volume-compression, either independently or simultaneously, as a direct function of the type of program input, with performance that is unequaled by most linear amplifiers. The extremely low noise characteristics of this unique, self-contained system provide a very low threshold of -40dBm, thus allowing the greatest input sensitivity and compatibility with audio equipment and accessories used in the professional recording, broadcasting, motion picture and sound-reinforcement industries.
As the fastest of all peak-limiting devices (100 nanoseconds to 2 microseconds), peak-limiting can be employed with no audible distortion of any kind, thus allowing undistorted recordings, transmissions, etc. at average levels significantly higher than conventional “0” VU (+4dBm or +8dBm) while simultaneously providing maximum amplitude protections. A white threshold indicating lamp provides the audio engineer – for the first time – a representation of the peak-limiting taking place without the task of monitoring an auxiliary oscilloscope. A separate red overload indicating lamp forewarns the operator, in advance of overload, exactly when to check his control adjustments without requiring his undivided attention. The continuously variable compression/limiting ratio assures the widest range of slope control available from 1.1:1 (approximately linear amplification) to approximately 100:1 (flat slope, maximum amplitude protection line). Coupled with a constant threshold attack level of -40dBm, the need to continuously reset input levels during operation for each new compression/limiting ratio is eliminated. Variable release time control allows the selection of the smoothest dynamic action commensurate with minimum distortion (typically less than 5/100ths of 1%). The uniform frequency response of this unit negates the need for “de-ess” roll-off on all high frequencies.
During actual listening, the absence of noise, distortion, and frequency discrimination is readily apparent. The Model 610 “COMPLIMITER” is particularly effective in controlling sibilant sounds, restricting extreme ranges, and providing the smoothest dynamic action.” TESTIMONIALS
“I’m hesitant to disclose to other mastering engineers what a wonderful game changer the V610 is.” – Garrett Haines
“They sound HUGE! I used the hell out of them on the new Jason Isbell record!!” – Dave Cobb
“The 610 has been my longtime ‘go to’ device for dirtying up drums, parallel compression, and other general ‘grit enhancement’ tasks. Its ability to pump and overdrive make it perfect for things like that. The 610’s not-so-dirty little secret is that, with proper settings, it can also be one of the cleanest, most transparent compressors available. Unique and invaluable. A classic.” – Pete Weiss
“They’ve been on every record I’ve engineered since, (1993), and most that I’ve mixed.” – Tchad Blake
“Behind me in the rack were mounted two 610 compressors that were a perfect fit across the stereo buss. How I missed that sound. Now, it’s back!” – Jack Douglas

Additional information